Arsip Tag: Aluminium 6061-T6

Jual Aluminium 7075 | 6061 | 5083 | 5052

aluminium lembaran

Standard Aluminium

ASTM B 209, ASTM B 210, ASTM B 211, ASTM B 221, EN 485-2, EN 573-3, EN 754-2, EN 755-2, ISO 6361,

Availability
Aluminium Plate Thk 5mm – 50mm Size 4ft x 8ft, 5ft x 10ft
Aluminium Roundbar Dia 1/ 4 ~ 14” Length 5ft ~ 12ft
Aluminium Square 6061 1/ 4 ” – 250mm, Length 6ft~ 16ft
Aluminium Hex 6061 1/ 4 ” ~ 3 ”, Length 10ft~ 12ft
SEALIUM, Sheet/ Plate 5383 , Thk 4mm~ 32mm Size 2m x 6m
ALSORAN, KOBELCO, 5052 Thk 5mm~ 1 ” Size 5ft x 10ft
ALJADE, KOBELCO , 5052 Thk 5mm~ 30mm Size 5ft x 10ft

Chemical Composition ( Wt.%)

Grade Al Cr Cu Fe Mg Mn Si Ti Zn Other each Other total
7075 87.1 – 91.4 0.18 – 0.28 1.2 – 2.0  0.5 2.1 – 2.9  0.3  0.4  0.2 5.1 – 6.1  0.05  0.15
6061 95.8 – 98.6 0.04 – 0.35 0.15 – 0.40  0.7 0.8 – 1.2  0.15 0.4 – 0.8  0.15  0.25  0.05  0.15
5083 92.4 – 95.6 0.05 – 0.25  0.1  0.4 4.0 – 4.9 0.4 – 1.0  0.4  0.15  0.25  0.05  0.15
5052 95.7 – 97.7 0.15 – 0.35  0.1  0.4 2.2 – 2.8  0.1  0.25  0.1  0.05  0.15

Mechanical Properties

Mechanical Properties (Metric) Aluminium Alloy Grade
7075 6061 5083 5052
Hardness, Brinell 150 95 85 60
Hardness, Knoop 191 120 109 83
Ultimate Tensile Strength (Mpa) 572 310 317 228
Tensile Yield Strength (Mpa) 503 276 228 193
Elongation at Break (%) 11 12 16 12
Modulus of Elasticity (Gpa) 71.7 68.9 70.3 70.3
Poisson’s Ratio 0.33 0.33 0.33 0.33
Fatigue Strength (Mpa) 159 96.5 159 117
Fracture Toughness (MPa-m½) 20 29 43  
Machinability (%) 70 50 30  
Shear Modulus (Gpa) 26.9 26, 26.4, 25.9,
Shear Strength (Mpa) 331 207 190 138

Physical Properties

Physical Properties (Metric) Aluminium Alloy Grade
7075 6061 5083 5052
Density (g/cc) 2.81 2.7 2.66 2.68
Electrical Resistivity (ohm-cm) 5.15e-006 3.99e-006 5.9e-006 4.99e-006
CTE, linear 250°C ( µm/m-°C) 25.2 25.2 26 25.7
Specific Heat Capacity ( J/g-°C) 0.96 0.896 0.9 0.88
Thermal Conductivity (W/m-K) 130 167 117 138
Melting Point ( °C) 477 – 635 582 – 652 591 – 638 607 – 649
Solidus ( °C) 477 582 591 607
Liquidus ( °C) 635 652 638 649

Processing

Processing Properties (Metric) Aluminium Alloy Grade
7075 6061 5083 5052
Annealing Temperature ( °C) 413 413 343
Solution Temperature ( °C) 466 – 482 529  
Aging Temperature ( °C) 121 160  
Hot-Working Temperature ( °C) 316 – 482 260 – 510

Applications

Shipbuilding, Rail cars, Vehicle bodies, Tip truck bodies, Mine skips and cages, Pressure vessels,Aircraft fittings, camera lens mounts, couplings, marines fittings and hardware, electrical fittings and connectors, decorative or misc. hardware, hinge pins, magneto parts, brake pistons, hydraulic pistons, appliance fittings, valves and valve parts; bike frames,etc

Referensi:
Metals Handbook, Vol.2 – Properties and Selection: Nonferrous Alloys and Special-Purpose Materials, ASM International 10th Ed. 1990.

Metals Handbook, Howard E. Boyer and Timothy L. Gall, Eds., American Society for Metals, Materials Park, OH, 1985.

Structural Alloys Handbook, 1996 edition, John M. (Tim) Holt, Technical Ed; C. Y. Ho, Ed., CINDAS/Purdue University, West Lafayette, IN, 1996.